PGM-FI Troubleshooting — Injector (Resistance / Voltage Check)
6-73flowchart1
(From page 6-72)
2
Turn the ignition switch OFF.
3
Disconnect the 2P connector from the injector that does not click.
4
Measure resistance between the 2 terminals of the injector.
5
Is there 1.5—2.5Ω ?
NO
Replace the injector.
YES
6
Turn the ignition switch ON.
7
Measure voltage between RED/BLK (+) terminal on the 2P connector and body ground.
8
(To page 6-74)
(cont'd)