Front Suspension - Knuckle/Hub

12-10parts diagram

Knuckle/Hub

Parts Diagram

Diagram image not available

Part Name	Notes
Upper Arm Anchor Bolt	Check for damage.
Upper Arm Bushing	Check for deterioration or damage. Apply silicone grease. Replacement, page 12-16
Circlip	—
Dust Boot	—
Knuckle Protector	—
Knuckle Ring	—
Ball Joint	Replacement, page 12-15
Circlip	—
Dust Boot	—
Castle Nut 12 mm	—
76 mm Snap Ring	—
External Circlip 40 mm	—
Wheel Bearing	Replace. Replacement, page 12-11
Front Hub	Check for damage or cracks. Replacement, page 12-11
Brake Disc	Check for wear or rust. Removal, page 12-12. Inspection, section 13.

Knuckle protector bolt (6 x 1.0 mm)

18N·m

Upper ball pin nut (10 x 1.25 mm)

44N·m

Spindle nut (22 x 1.5 mm), Replace

185N·m

Wheel nut (12 x 1.5 mm)

110N·m

NOTE

Spindle nut: After tightening, use a drift to stake the spindle nut shoulder against the spindle.