Illustrated Index - Overall Suspension

12-9parts diagram

Overall Suspension

CAUTION

Replace the self-locking nuts after removal. Replace the self-locking bolts if you can easily thread a nut past their nylon locking inserts.

NOTE

Wipe off the grease before tightening the nut at the ball joint.

Parts Diagram

Diagram image not available

Part Name	Notes
Upper Arm Assembly	Inspection/Disassembly/Reassembly, page 12-16
Adjusting Bolt	Adjust the depth by turning the bolt.
Circlip	—
Damper Unit	Inspection/Disassembly/Reassembly, page 12-17
Radius Rod Rubber Bushing A	Check for deterioration or damage. Apply silicone grease.
Radius Rod Rubber Bushing B	Check for deterioration or damage. Apply silicone grease.
Radius Rod Washer	—
Front Radius Rod	—
Lower Arm Rubber Bushing	Check for deterioration or damage. Apply silicone grease.
Front Lower Arm	Check for damage. Apply silicone grease.
Stabilizer Bar	Check for bending or damage.
Stabilizer End Rubber Bushing	Check for deterioration or damage. Apply silicone grease.
Damper Fork Rubber Bushing	Check for deterioration or damage. Apply silicone grease.
Damper Fork	—
Damper Fork Bolt	—

Specification	Value
8 mm self-locking nut (ball joint), Replace	22N·m
12 mm self-locking nut (radius rod), Replace	44N·m
Damper pinch bolt	44N·m
12 mm self-locking nut (damper fork), Replace	65N·m

8 mm self-locking nut (ball joint), Replace

22N·m

12 mm self-locking nut (radius rod), Replace

44N·m

Damper pinch bolt

44N·m

12 mm self-locking nut (damper fork), Replace

65N·m

CAUTION

Do not interchange the radius rod rubber bushings. The thick bushing should be installed in front position.