Troubleshooting - Flow Chart-Blower (cont'd)
15-10flowchartFlow Chart-Blower (cont'd)
1
(From page 15-9)
2
Turn the ignition switch OFF.
3
Remove the jumper wire.
4
Disconnect the 6P connector from the fan switch.
5
Connect the jumper wire between the BLU/BLK terminal and body ground.
6
Turn the ignition switch ON.
7
Does the blower motor run?
NO
Repair open in BLU/BLK wire between blower and fan switch.
YES
8
Turn the ignition switch OFF.
9
Remove the jumper wire.
10
Inspect the fan switch (page 15-23).
11
Is the fan switch OK?
NO
Replace the fan switch.
YES
Repair open in BLK wire between the fan switch and body ground or poor ground (G201).