Troubleshooting - Flow Chart: Compressor (cont'd)
15-32flowchartFlow Chart : Compressor (cont'd)
1
(From page 15-30)
2
Disconnect the RED terminal and turn the ignition switch on.
3
Measure voltage between the RED terminal (+) and body ground.
4
Is there battery voltage?
NO
Repair open in RED wire between the compressor clutch relay and compressor clutch connector.
YES
5
Turn the ignition switch OFF and check the thermal protector (page 15-53).
6
Is the thermal protector OK?
NO
Replace the thermal protector.
YES
7
Replace the compressor clutch.