Flow Chart - Blower
15-9flowchart1
Blower motor does not run.
2
Inspect No.19 (30A) fuse.
3
Is the No.19 fuse OK?
NO
Replace fuse.
YES
4
Disconnect the 2P connector from the blower motor.
5
Turn the ignition switch ON.
6
Measure voltage between BLU/WHT terminal (+) and body ground (-).
7
Is there battery voltage?
NO
Repair open in BLU/WHT wire between blower and ignition switch.
YES
8
Turn the ignition switch OFF.
9
Reconnect the 2P connector to the blower motor.
10
Connect a jumper wire between the BLU/BLK terminal and body ground. Turn the ignition switch ON.
11
Does blower motor run?
NO
Replace the blower motor.
YES
12
(To page 15-10)