Timing Belt - Illustrated Index

5-22parts diagram

DOHC engine. P/S pump belt adjustment KQ only.

Illustrated Index

NOTE

• Refer to page 5-26 for positioning crank and pulley before installing belt. • Refer to page 5-6 for alternator belt adjustment. • Refer to page 5-7 for P/S pump belt adjustment (KQ only). • Refer to page 5-7 for A/C compressor belt adjustment. • Mark direction of rotation before removing.

Parts Diagram

Diagram image not available

Part Name	Notes
ADJUST BOLT	45 N·m (4.5 kg-m, 33 lb-ft). For adjustment only, do not remove.
UPPER COVER	6 x 1.0 mm 10 N·m (1.0 kg-m, 7 lb-ft)
LOWER COVER	Remove the four bolts. 6 x 1.0 mm 10 N·m (1.0 kg-m, 7 lb-ft)
TIMING BELT	Inspection, page 5-23; Adjustment, page 5-23. 8 x 1.25 mm 38 N·m (3.8 kg-m, 27 lb-ft) Apply lubricant.
TIMING BELT BACK COVER	6 x 1.0 mm 10 N·m (1.0 kg-m, 7 lb-ft)
CAMSHAFT PULLEY	—
VALVE COVER	—
WASHER AND GROMMET	—
CROWN NUT	6 x 1.0 mm 10 N·m (1.0 kg-m, 7 lb-ft)
RUBBER SEALS	—
BELT TENSIONER	—
KEYS	—
CRANKSHAFT TIMING BELT PULLEY	Install with concave surface facing in.
CRANKSHAFT PULLEY	12 x 1.25 mm 115 N·m (11.5 kg-m, 83 lb-ft)
RUBBER SEAL	Install with concave surface facing out.
SPECIAL WASHER	Install with the unchamfered edge facing pulley.

Support our work!

Timing Belt - Illustrated Index

Illustrated Index

Search Manual