Cylinder Head - Removal (engine removal not required)

5-36parts diagram

DOHC engine (D16A8/D16A9). Cylinder head removal without removing the engine.

Removal (engine removal not required)

CAUTION

To avoid damaging the cylinder head, wait until the coolant temperature drops below 38°C (100°F) before removing it.

NOTE

Use new O-rings and gaskets whenever reassembling.

Parts Diagram

Diagram image not available

Part Name	Notes
CROWN NUT	6 x 1.0 mm, 10 N·m (1.0 kg-m, 7 lb-ft)
WASHER AND GROMMET	—
VALVE COVER	—
RUBBER SEALS	Replace. Inspect for signs of wear and damage.
UPPER COVER	6 x 1.0 mm, 10 N·m (1.0 kg-m, 7 lb-ft)
CYLINDER SENSOR	6 x 1.0 mm, 12 N·m (1.2 kg-m, 9 lb-ft)
CAP	—
DISTRIBUTOR	8 x 1.25 mm, 24 N·m (2.4 kg-m, 17 lb-ft)
EXHAUST CAMSHAFT HOLDERS	6 x 1.0 mm, 12 N·m (1.2 kg-m, 9 lb-ft)
INTAKE CAMSHAFT HOLDER	—
EXHAUST CAMSHAFT	—
ROCKER ARM	—
INTAKE CAMSHAFT	—
LOCK NUT	25 N·m (2.5 kg-m, 18 lb-ft)
KEY	—
SPECIAL WASHER	—
CAMSHAFT PULLEY	8 x 1.25 mm, 38 N·m (3.8 kg-m, 27 lb-ft)
SEAL	—