Radiator - Illustrated Index
5-57parts diagramCooling system illustrated index for the 1.6L (D16-series) DOHC PGM-FI fuel-injected engine. Total cooling capacity 5.5 liters (vs 1.6L SOHC engine).
DOHC Fuel-Injected Engine:
WARNING
System is under high pressure when engine is hot. To avoid danger of releasing scalding coolant, remove cap only when engine is cool.
| Specification | Value |
|---|---|
| Total Cooling System Capacity (Incl. heater, and reservoir tank 0.4 liters) | 5.5 liters (5.8 U.S. qt, 4.8 Imp. qt.) |
Total Cooling System Capacity (Incl. heater, and reservoir tank 0.4 liters)
5.5 liters (5.8 U.S. qt, 4.8 Imp. qt.)
NOTE
Check all cooling system hoses for damage, leaks or deterioration and replace if necessary. Check all hose clamps and retighten if necessary. Use new O-rings whenever reassembling.
RADIATOR CAP — Pressure test, page 5-60.
RADIATOR — Refilling, page 5-59. Leak test, page 5-60. Inspect seams between core fins and tanks for leaks. Blow dirt out from between core fins with compressed air. If insects, etc., are clogging radiator, wash them off with low pressure water.
| Specification | Value |
|---|---|
| Fan motor mounting bolt | 10N·m |
| Temperature gauge sending unit | 9N·m |
| Thermosensor | 18N·m |
Fan motor mounting bolt
10N·m
Temperature gauge sending unit
9N·m
Thermosensor
18N·m
Component Location
1COOLANT RESERVOIR()
2FAN()
3FAN MOTOR()
4FAN SHROUD()
5HARNESS CLIP()
6RADIATOR CAP()
7RADIATOR()
8UPPER RADIATOR HOSE()
9LOWER RADIATOR HOSE()
10WATER PUMP INLET PIPE()
11THERMOSTAT HOUSING()
12THERMOSENSOR()
13TEMPERATURE GAUGE SENDING UNIT()
14HEATER HOSES()