Steering Pump — Illustrated Index

11-38parts diagram

Illustrated Index

CAUTION

Pump components are made of aluminium. Be careful not to damage them when servicing.

Clean all of the disassembled parts thoroughly.

Replace all O-rings and seals. Do not dip new O-rings and seals in solvent; coat O-rings with steering grease before installation, and make sure they stay in place during reassembly.

The shaded parts are selectively fitted, and should not be disassembled except to replace seals. If any one of them is faulty, replace the whole pump as an assembly.

Parts Diagram

Diagram image not available

Part Name	Notes
PORT HOUSING	Check for damage to sealing face.
DRIVEN GEAR	Check for damage and wear.
PUMP HOUSING	Check for damage to sealing faces.
12.3 x 1.9 mm O-RING	Replace.
8x10 mm DOWEL PIN	—
INLET PORT FITTING	—
19.8 x 1.9 mm O-RING	Replace.
HOUSING SEAL	Replace.
DRIVE GEAR	Check for damage and wear.
OUTLET PORT FITTING	—
12.3 x 1.9 mm O-RING	Replace.
VALVE SPRING	—
CONTROL VALVE	Check for pressure leak.
8x10 mm DOWEL PIN	—
PLUNGER A	Check for damage and wear.
PRUNGER SEAL	Replace.
HOUSING SEAL	Replace.
19.8 x 1.9 mm O-RING	Replace.
PLUNGER B	Check for damage and wear.
OIL SEAL	Replace.
PUMP FRONT COVER	Check for damage to sealing face.
6 mm FLANGE BOLT	12 N·m (1.2 kg-m, 9 ft-lb)
PULLEY	Check for distortion and cracks.
PULLEY BOLT	33 N·m (3.3 kg-m, 24 ft-lb)

Support our work!

Steering Pump — Illustrated Index

Illustrated Index

Search Manual